Astro Products AC100V Double Action Electric Double Action Polishing Water Car Car Wash Mirror Aurora Mark Polisher, Polisher, Machine, Polishing,

■Product Description: This is a double-action electric polisher. Because it uses vibration pads, it has a lower abrasive power than a single-action rotary polisher under the same conditions. While it is not ideal for quick polishing, it is well-suited for finishing tasks such as matting and polishing. While it is recommended for experienced polishers, its double-action design makes it less likely to move around and is easy to use, even for beginners. It is also recommended for those trying out body polishing for the first time. The pads are hook-and-loop fastener-type, allowing for easy replacement of buffs depending on the condition of the surface and the purpose of the polishing. It features a soft-start function that reduces recoil when the switch is turned on. The motor speed can be adjusted to six levels (2200 to 5300 min-1) with a dial. The trigger switch can be locked in place, eliminating the need to hold it while polishing. It comes with a D-shaped handle that can be gripped up and down, left and right, and a side handle that can be gripped on either the left or right, allowing you to customize the polishing surface and your preferences. It is compatible with commercially available buffs with a nominal diameter of 125 mm. ■Caution: *Buffs are not included. Please prepare them separately. *Use pads and buffs with a nominal diameter of 125mm. *Beginners are recommended to use buffs and compounds with low abrasive power to become accustomed to polishing in inconspicuous areas. *Do not press hard against the polishing surface. To avoid seizure or malfunction of the motor, or dents, melting, or scratches on the polishing surface, apply uniform pressure with a weight equivalent to the polishing surface's own weight. *Do not use with power sources other than AC100V. *Always observe the rated operating time. The rated operating time may be shorter depending on usage and conditions. *Do not wear loose gloves, such as work gloves, as they may become entangled and cause injury or an accident. *This product is not splash-proof or waterproof. Do not use in rain or in wet or humid locations. ・Main unit size: L425 x W95 x H115mm (excluding pad, handle, and power cord) Weight: 2.2kg (excluding pad, handle, and power cord) ・Power supply: AC100V ~ 50/60Hz ・Rated power consumption: 750W -Speed adjustment: 6 levels -No-load rotation speed: 2200-5300 min-1 -Pad operation: double action Orbit diameter: 15mm Power cord length: 5m Rated usage time: 20 minutes Material: PA (body), aluminum (head), steel (gear) Accessories: D-shaped handle, side handle, Φ125mm pad, 5mm HEX wrench, dedicated wrench, spare brush set ・PSE mark acquired (Notifying business name: World Tool Co., Ltd.) ■Product description: This is a double action electric polisher. Because it is a double action type that polishes by vibrating the pad, it has a lower abrasive power than a single action type that polishes by rotation under the same conditions, and is not suitable for short polishing jobs, but is suitable for finishing work such as dulling and polishing. It is recommended for those with extensive polishing experience, but since the double action makes it less likely to move around and is easy to use even for beginners, it is also recommended for those who want to try polishing their body with a polisher for the first time. The pads are hook-and-loop fastener type, so you can easily replace the buffs depending on the condition of the polishing surface and your purpose. Equipped with a soft start function that reduces recoil to the operator when the switch is turned on. The motor rotation speed can be adjusted in six steps (2200 to 5300 min-1) using the dial. The trigger switch can be locked in place, so there is no need to keep holding it while polishing. It comes with a D-shaped handle that can be gripped up, down, left and right, as well as a side handle that can be gripped on either the left or right, so you can use it according to the direction of the polishing surface and your preference. Commercially available buffs with a nominal diameter of Φ125 mm can be used. ・PSE mark acquired (Notifying business name: World Tool Co., Ltd.) ■Notes: *Buffs are not included. Please prepare them separately. *Please use pads and buffs with a nominal diameter of Φ125mm. *For beginners, we recommend using buffs and compounds with low abrasive power so that you can get used to polishing in less noticeable areas. *Do not press too hard against the polishing surface. This may cause the motor to seize or malfunction, or the polishing surface to become dented, melted, or scratched. Use only a weight equivalent to the polishing surface's own weight and apply uniform pressure. *Do not use with any power source other than AC100V. *Please be sure to observe the rated usage time. The rated usage time may be shortened depending on the usage method and conditions. *Do not wear loose gloves such as work gloves, as they may get caught in the machine and cause injury or an accident. *This product is not splash-proof or waterproof. Do not use it in the rain or in wet or humid places.