Professional UHF Wireless Mic Receiver and Transmitter System for Flute Piccolo

Features: 1. Clear sound quality --- The condenser microphone core, so that the sound reproduction of the instrument can reach 99%, and the microphone has a shock-absorbing spring, which effectively reduce 98% key tone of the flute .Stable signal transmission --- The signal transmission distance is 164ft (50m). 2. Easy to use --- Clamp the microphone directly on the mouth of the saxophone, plug the receiver into the MIC interface of the speaker, and then turn it on and use it . A total of 16 UHF channels can be selected, and 3-4 sets of microphone systems can be used at the same time without signal interference. 3. High-capacity lithium battery --- One divides into two charging cable to charge the receiver and transmitter at the same time, greatly reducing the charging time.The transmitter and receiver has built-in 750mAh battery, which can be recharged 2000 times, and can be used for 6 hours after 2 hours of charging. 4. Widely Used --- This flute wireless microphone can be used in solo performance, accompaniment performance, personal entertainment, group performance. 6.35mm interface (Also added a 6.35 to 3.5mm interface) can be used to a variety of equipment, loudspeakers, computer audio, drawbar speakers, mixers, and so on. 5. Widely Used --- This brass instruments wireless microphone can be used in solo performance, accompaniment performance, personal entertainment, group performance. 1/4 inch plug (and give a 1/4 inch（6.35mm） to 1/8 inch（3.5mm） conversion plug) can be used to a variety of equipment, loudspeakers, computer audio, mixers, and so on. SPECIFICATION UHF 600-952MHz frequency range (region dependant) Digital wireless audio transmission 48KHz audio sampling mode Pre-set 16 selectable frequencies Digital ID, completely solves frequency interference IR sync downloading the frequency from receiver Lithium battery power supply Portable plug-on receiver, plug in the mixer or active speaker directly Up to 60m line-of-sight operating range Suitable for saxophone stage performances, street performances, etc. RECEIVER Frequency range: 660-690MHz (region dependant) Frequency: Pre-set 16 selectable channels Modulation mode: pi/4 DQPSK Latency: <6ms Sampling: 48KHz Frequency response: 60Hz - 15KHz ± 2dB Total Harmonic Distortion: <0.8%(1KHz) Signal/noise ratio: >92dB Receiving sensitivity: -92dBm Output: 6.35mm plug Power supply: 3.7V Lithium battery Power consumption: >6 hours continuosly using Dimensions: 185*20*10mm TRANSMITTER Frequency range:660-690MHz (region dependant) Modulation mode: pi/4 DQPSK Transmitter power: 10mW Sensitivity: -47 db±2dB Frequency change: IR synch Microphone type: Condenser Microphone dimension: Φ4.0*1.5mm Power supply: 3.7V lithium battery Power consumption:>6 hours continuosly using Dimension: 145*40*27mm Package includes: 1x Receiver 1x Transmitter 1x USB Charging Plug 1x Charging Cable 1x 6.35mm to 3.5mm Conversion plug 1x Carry Bag 1x User Manual Note: Other accessories demo in the picture is not included. Please read the manual carefully before use.