2S 8A Li-Ion 6.4V-8.4V 15A Peak Current Battery Protection Board Bms Pcm For Li-Ion Lipo Battery Cell

1) High-precision voltage detection circuit 2) High-voltage device is used for charger terminal 3) Built-in three-level overcurrent detection circuit (overcurrent 1, overcurrent 2, or load short circuit) 4) MOS tube can control battery charging and discharging 5) Low standby current consumption Overcharge voltage: 4.25-4.35v±0.05v Overdischarge voltage: 2.5-3.0v±0.05v Maximum continuous current: 8A Maximum peak current: 15A Operating temperature: -40---+50 Storage temperature: -40--+80 Low current: less than 3uA Service life exceeds 50,000 hours Resistance: less than 300mΩ Shortcut protection: Protectable, rechargeable and repairable Connection method: B+ connects to the positive pole of the battery B- connects to the negative pole of the battery MB connects to the connection point between battery 1 and battery 2 P+ connects to the positive pole of the charging/discharging terminal (common to the charging/discharging terminal) P- connects to the negative pole of the charging/discharging terminal (common to the charging/discharging terminal) Warm reminder: When assembling the battery pack, the battery voltage, capacity, and internal resistance must be matched. The battery voltage is suitable at the rated voltage of about 3.7V. After assembling the battery pack, there is no output, and it can be charged with a voltage of 8.4V. New and high quality Material: PCB Color: green/blue Size:40.5*15.7mm Package Included:1Pc Note: Due to manual measurement, please allow an error of 1-3mm. As different computers display different colors, thank you for your understanding, the actual product color may be slightly different from the image. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.