Wall Light Switch Self-powered Remote Control No Battery No Wire Ip54 Waterproof Indoor White Grey Gold Lamp Wireless Switch

Current :45A Certification :CCC Material :Plastic Switch Type :REMOTE CONTROL Warranty :1years Remote Distance :20m Item Type :SWITCHES Features :rf433 Brand Name :YQXINQIDZ Is Smart Device :YES Origin :China Certification :CCC The working principle of the self-powered wireless wall switch: The self-powered wireless switch adds a receiver to the connection between the light and the wire. The switch does not require wiring; there is a self-powered module inside the switch, which converts the kinetic energy generated by pressing into electromagnetic energy, and then into electric drive components. The device emits radio frequency signals. The receiver turns the light on or off when it receives a signal. Wireless remote control parameters: Size:86*88*15.5mm Working voltage:AC90-260v (DC 120-300V) Emission current:<30mA Transmit power:>+13dBm Key Force:300+/-50g Waterproof performance:1P54 Panel bottom case:interchangeable bottom case universal Standby current:Oua Frequency:433.92+/-75KHz MHz Remote control distance:open>200M indoor>50M Button life:>200,000 times Instruction Manual 1. Set on and off status Long press the receiver button for 3 seconds, the indicator light flashes once, release the button, press the wall switch once, and the receiver indicator flashes once, indicating successful learning. 2. Set the on state (only for turning on the light) Long press the receiver button for 5 seconds, the indicator light flashes twice, release the button, press the wall switch once, and the receiver indicator flashes once, indicating successful learning. 3. Set the off state (only for turning off the lights) Long press the receiver button for 7 seconds, the indicator flashes 3 times, release the button, press the wall switch once, and the receiver indicator flashes once, indicating successful learning. 4. Clear the learning status. Long press the receiver button for 10 seconds, the indicator light flashes 4 times, indicating that all learning remote controls are deleted. 5.Short press the receiver button, each time you press it, the relay will turn on or off. Wireless remote control is not required Cabling without chisel wall can be attached anywhere in the home