Steloproad Industrial Gigabit Injector 48V DC 95W Up To 100m Output DIN Rail Mount Hardened High Power PoE Adapter To CIP40 PoE++ PoE++ -40°C 80°

【JOOM Approved! Sold & Shipped by Trusted Japanese Sellers】

🔹 Operated by Verified Japanese Sellers – Approved by JOOM, our experienced Japanese sellers provide reliable service. Authenticity Assured 🔹Every piece is meticulously authenticated and inspected under strict Japanese quality standards. 🔹 Direct Shipping from Japan – Carefully packed and promptly shipped straight from Japan. 🔹 Japanese-Standard Quality Control – Strict inspections ensure only high-quality products reach you. Electronics Note (When Applicable) 🔹Japanese electronic goods run on 100V (Type A plug). A step-down voltage transformer is required in 220–240V regions.A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. 🔹 About Included Manuals – If a manual is included, it will primarily be in Japanese. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

[12~48VDC power input]: Industrial grade PoE injector supports wide voltage input, making it more suitable. As you know, most low voltage DC power systems only have 12V or 24V power supplies instead of 48V. This PoE injector can use 12V or 24V input to boost to 48V PoE output, so you don't need to consider the voltage of your power supply. device, it will be more convenient [Safe to use]: The poe adapter uses IEEE802.3af/at/bt PoE standard, is suitable for both 802.3af/at equipment, and has PD detection function, so you can connect non-PoE devices It won't burn even if you do. error [6KV Lightning Protection]: Our POE injector adopts surge protection design, can be used in harsh environments, and can withstand lightning strikes up to 6KV. Operating temperature is -40℃~80℃ (-40℉~176℉) [Wide range of installation methods]: The poe injector supports 10/100/1000 Base-T Gigabit networks, and also has Din-Rail and Wall-Mount installation methods. It has wide bandwidth and can support 4K/8K camera transmission. Widely used in wireless AP/CCTV security transmission/IP phone etc. [Worry-free Guarantee]: You will get 1x po injector and 1x user manual. Buy now and enjoy 30-day money-back, 18-mono exchange guarantee, and lifetime technical support [Worry-free Guarantee]: You get 1x po injector and 1x user manual. Buy now and enjoy 30-day money back, 18-mono exchange guarantee and lifetime technical support Overview: LNK-INJ301 product is an enhanced Gigabit high power PoE injector that can connect IEEE 802.3af/at/bt PoE devices such as cameras and access points to non-PoELAN switches within 100m distance Features: 12 ~48VDC power input 1 RJ45 Ethernet data input port + 1 RJ45PowerOver Ethernet output port (data + power) Supports IEEE802.3at Power over Ethernet (PoE+) power supply equipment Supports 10/100/1000Base-TX Supports DIN rail and wall mounting Extensive LED indicators for PoE diagnostics Environmental curing -40°C to 80°C ( -40°F to 176°F) operating temperature Power pin assignment: 4/5 (+), 7/8 (-) Setting method: a) Connect the injector's Ethernet port to the LAN switch with a network cable. b) Connect the PoE output port to your PoE device. c) When the device is powered on, all PWR indicators will be on. If the indicator is not lit If so, check the power connection. d) When all cables are connected correctly, the indicator will light up according to the port status LED.  Package Contents: 1*LNK-INJ301 30WPoE Injector 1*Quick Start Guide 1*L-shaped Wall Mount Bracket