A.K Factory N-BOX Slash (JF1.JF2 Compatible) Optional Coupler Power Outlet

• You can take out the constant power supply, ACC, IG2, and illumination (normally by removing the deck or getting power from the fuse) with this one. • Just plug it into your fuse box!!This is an indispensable item for tinkering with electrical equipment. • I use the same product to power my drive recorder and radar detector and have never had any problems. • Contents: Optional coupler, installation manual, (image shown: fuse, bullet terminal) • Compatible models: NBOX (JF1, JF2) ~February 2019

Product description

This is a power connector (instruction manual, fuse, gigosios) for retrofit options on Honda vehicles.

Please make sure that nothing is inserted into the optional coupler insertion part before purchasing.

Very easy to install ☆ Just plug it into the fuse box in the driver's seat!

After plugging it in, you can use the following power sources!

1.Backup battery power supply (always on) *As per the instructions, it cannot be used unless the fuse is inserted. 2.Accessory power supply (ACC) (turns on by turning the key once or pressing START once without stepping on the brake) 3.Ignition power supply (IG2) (turns on by turning the key twice or pressing START twice without stepping on the brake) 4.Illumination power supply + (illumination) (energized when the small light is lit)

I have been using this product to power my drive recorder and radar detector since October 2017, and have never had any trouble.

*Due to lot changes, there may be changes in wiring color and usage. *We will only respond to initial defects within 7 days after receiving the product. *If you have any questions or compatibility, please ask before purchasing. *Please install at your own risk. *All products shipped from A.K factory have been tested for operation.

Caution (Disclaimer) > Please read carefully

*This product is a product exclusively for the car model. Please note that it cannot be installed on other vehicle models, and exchanges and returns for different vehicle models will be handled at the customer's convenience.

Be sure to install a fuse between the parts to be installed and the optional coupler. Doing so may cause a vehicle fire or malfunction. Even if there is an unexpected accident, we will not be held responsible at all, so please understand that you are responsible for the installation work. When you remove the coupler that was originally inserted, the settings may be initialized depending on the attached items, so please set them again. Please check if there is space in the coupler socket before purchasing.