Panasonic Advanced Series Recessed On/Off Indicator Switch D Ground 250V 15A 20A Fire-Resistant Plate Included Matte Gray WTL192273HK

[Product Description]

This is a recessed switch outlet for air conditioners from the Advanced Series. The surface of the handle and plate has a matte finish (textured surface).

Note: When wiring, insert the wire fully into the terminal. Insufficient insertion may cause electric shock or short circuit in case of leakage. Do not use bent, damaged, or discolored wires, as they can cause overheating and fire. Securely connect the grounding wire to the grounding terminal (rear side). Inadequate wiring or grounding can cause electric shock if the connected load device leaks.

Do not remove the handle while the plate is attached, as it may cause product damage. Tighten the box screws firmly to prevent deformation of the mounting frame. Install on a wall with a thickness of at least 7mm. (9mm or more if using a weatherproof cover) Since a panel cover (protective cover) cannot be used, installation without a box is not supported in areas with installed glass wool or similar insulation. Ensure at least 42mm of depth in the mounting area for easy wiring (assuming 9.5mm thick gypsum board + standard box). Make clean cuts at the four corners of the wall hole to prevent the mounting frame from hitting. For boxless installation, use accessories such as scissors brackets WN39929020 or pressing brackets WN3996020. Use WVA7200W for exposed box installations.

For stranded wire, use WV2504 rod-type crimp terminals. Size: Width 70×Depth 40.8×Height 120mm; Color: Matte Gray; Material: Plate: Zinc-plated steel, ABS resin; Lead wire: Flame-retardant polyethylene; Mounting frame: Modified PPO resin; Outlet: Urea; Handle: ABS resin, Polycarbonate; Switch D: Body: Urea, Cover: PBT resin. Contact method: Silver alloy-silver alloy snap contact. Wiring method: Screwless terminal type (wire insertion type). Circuit configuration: Double cut. Number of poles and configuration (outlet): 2-pole grounding type. Rated: Switch D: 20A 300V AC, Outlet: 20A 250V. Applicable regulations: Electrical Appliance and Material Safety Law (Specified Electrical Appliances). Reference standards: Switch D: JIS C 8304 (Small Switch for Indoor Use), Outlet: JIS C 8303 (Wiring Plug Connector). Applicable wires: Switch D: 600V vinyl-insulated wire (IV), 600V vinyl-insulated vinyl sheath cable (VVF), 600V flame-retardant polyethylene-insulated wire, 600V polyethylene cable (diameter 2mm Cu single wire only); Outlet: 600V vinyl-insulated wire (IV), 600V vinyl-insulated vinyl sheath cable (VVF), 600V flame-retardant polyethylene-insulated wire, 600V polyethylene cable (diameter 2, 2.6mm Cu single wire only). Grounding terminal: Diameter 1.6, 2, 2.6mm Cu single wire only. Operating ambient temperature: -10 to 40 degrees Celsius.

[Important Notice - For Overseas Customers]

Thank you for purchasing this product. Before using it overseas, please carefully read the following important notices.

1. Laws, Regulations, and Safety Standards This product complies with Japanese safety standards. Before use in your country, please check its compliance with local laws, regulations, and safety standards. Certain product categories (electronics, cosmetics, food, etc.) may require certification in the importing country.

2. Regarding Electrical Products 【Voltage Compatibility】 When using electrical products, please note that they are designed to match Japanese voltage specifications (90-110V). Using them with a different voltage may cause malfunction.

【Plug Type】 Our products use Japanese plug types (Type A or Type B). Please use a conversion adapter as needed.

【Important Notes Regarding Transformers and Adapters】 Transformers adjust the voltage to match the requirements of the equipment. Conversion adapters only change the plug shape and do not adjust the voltage. Using only a conversion adapter without a transformer may damage the product.

[Regarding Liability] We are not responsible for any malfunctions or damage caused by improper use, such as operating the product without a transformer.

3. Language and Manual Product instructions and displays may be in Japanese only. An English version of the manual can be downloaded from our website.

4. Regarding Product Returns and Exchanges Please note that if you wish to return or exchange a product, you will be required to submit a video of the unpacking process.