------------------------------------------------------------------------------------------------------------------
【Color & Appearance】
Actual color may vary slightly from the photos due to screen settings, lighting, or production batch differences.
【Size Note】
Please refer to the size chart in the listing images and/or listing description before purchasing, as sizing may differ slightly from your local standards (cm-based measurements).
------------------------------------------------------------------------------------------------------------------
The first "all-around" ring-emitting LED light in Japan, featuring optimal balance, an all-around slim head, and comfortable operation. *Among domestic rechargeable impact drivers. As of December 2022, according to Makita research. Significantly improved visibility during work. Approximately 2.5 times brighter (compared to Makita's conventional 18V model). Brightness can be switched between 3 levels (high/medium/low). *Among domestic rechargeable impact drivers. As of December 2022, according to Makita research. Can also be used as a work light. Can be used as simple lighting in "light mode". Lighting time is approximately 1 hour.
New trigger switch. Intuitive trigger speed control from low to high speeds. Grip close to the shaft. The hand is closer to the head, making it easier to press the shaft. Reduces cam-out. Battery offset to the rear. Optimized center of gravity for balanced tightening in all directions. Also reduces interference with obstacles. Easy-to-see and easy-to-use control panel positioned at the rear. Mode operation and battery level can be checked while holding the tool.
"Industry's smallest bit runout," double ball bearing. New bit sleeve shape. Ribs are added to the edge to prevent damage even if the sleeve comes into contact with the material. *Among domestic cordless impact drivers. Makita research, December 2022. Tilt angle of approximately 10.5°. Excellent corner driving performance reduces cam-out. Comfortable work even near walls. Select the optimal mode according to the work. Mode memory function. By pressing two buttons simultaneously, you can register one frequently used mode. Switch between "mode used most recently" and "registered mode" with the button on the handle.
DC 18V, slide-type Li-ion battery specification. Battery and charger sold separately. Tightening capacity: Small screws M4-M8 / Standard bolts M5-M16 / High-strength bolts M5-M14 / Coarse thread 22-125mm. Maximum tightening torque: 180 N・m. Rotation speed [revolutions/min]: Fastest 0-3,600 / Strong 0-3,200 / Medium 0-2,100 / Weak 0-1,100. Easy mode rotation speed [revolutions/min]: Wood 0-1,800 / Bolts 0-3,600 / Self-tapping thin boards 0-2,900 / Self-tapping thick boards 0-3,600. Impact rate [impacts/min]: Fastest 0-3,800 Strong 0-3,600 Medium 0-2,600 Weak 0-1,100. Easy Mode Impact Rate [strokes/minute]: Wood 0-3,800 / Bolts 0-3,800 / Self-tapping thin boards Stops immediately after impact begins / Self-tapping thick boards 0-2,600. Work volume per charge (wood screws, material: lauan φ4.3 x 65mm approx.): Approximately 960 screws
Dimensions: 111mm (length) x 81mm (width) x 234mm (height). Weight: 1.5kg (including battery)
No-delivery refund
