introductory TAGATORON carbon front AT pivot bumper for assembly instruction manual included [Gimmick series] front, type,

Welcome to MJ Select. We are Japanese seller. We ship authentic items from Japan. Please enjoy shopping with peace of mind! -------------------------------------------- 【About Included Manuals】 If a manual is included, it will primarily be in Japanese. We recommend using image translation apps if needed. 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. -------------------------------------------- ✅This is a bumper (assembled type) that combines the features of "AT bumper" and "pivot bumper" and can withstand impacts from above and below and from the front. ✅In response to the impact from the front, the pivot moves backwards, allowing the impact from the bumps on the 5-lane course to escape. ✅It shows its true value especially when the machine receives impact from the front, such as on a rocking straight. ✅ By moving the rollers backwards, it absorbs the corner impact caused by jumping in after a jump, making it easier to screw onto the course. ✅The hardness of the pivot can be adjusted by the number of rubber wraps. If there are no steps such as a 3-lane course, you can increase the number of turns to achieve a hardness close to rigid. ✅ Can be installed on MS/FM-A/AR chassis (bumper cut required for installation) ⚠️This product is not manufactured by Tamiya Co., Ltd. It was created to be used as an introduction to parts processing, and to allow you to easily enjoy the gimmick in personal races. It cannot be used in official Mini 4WD competitions or races based on official competition rules. Product introduction ●This is a bumper (assembled type) that combines the features of the "AT bumper" and "pivot bumper" and can withstand impacts from above and below and from the front. ●In response to the impact from the front, the pivot moves backwards, allowing the impact from the bumps on the 5-lane course to escape. ●It shows its true value especially when the machine receives impact from the front, such as on a rocking straight. ●By moving the rollers backwards, it absorbs the corner impact caused by jumping in after jumping, making it easier to screw onto the course. ●The hardness of the pivot can be adjusted by the number of rubber wraps. If there are no steps such as a 3-lane course, you can increase the number of turns to achieve a hardness close to rigid. ●Can be installed on MS/FM-A/AR chassis (bumper cut is required for installation) -This product is not manufactured by Tamiya Co., Ltd. It was created to be used as an introduction to parts processing, and to allow you to easily enjoy the gimmick in personal races. It cannot be used in official Mini 4WD competitions or races based on official competition rules.