Beskrivelse
We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. The AD-10 is equipped with two input systems that can be used in a variety of situations. You can use the input for a guitar equipped with two pickups, piezo and magnetic, or switch between two connected guitars. Input gain and EQ can be set appropriately for each input, and there is also a boost function that allows you to change the volume difference between finger-pulling and stroke performance, as well as the volume during solo performance, with a single button. In addition to the standard jack, the output is equipped with a stereo compatible XLR terminal. It also has a ground lift switch so it can be connected directly to a PA as a direct box. In addition, the output can be used in a variety of situations, such as separate outputs for pre and post inputs, and separate outputs for connected guitars. The AD-10 is equipped with an acoustic resonance function that allows you to reproduce the raw, full, natural sound of an acoustic guitar on a live stage, which is lost due to pickup characteristics. It is also equipped with a compressor that uses our proprietary advanced technology ``MDP'' that responds to the range and dynamics of phrases and always provides a natural playing feel and sound. This is a next-generation compression effect that matches any acoustic guitar playing style. What's more, with the simple turn of a knob, the internal parameters are linked in a complex manner, creating an ambience function that creates a high-quality spaciousness while retaining the delicate resonance of an acoustic guitar, as well as delay/chorus, which are familiar to guitarists, and are useful for creating impressive sounds. Both effectors have high-quality sounds optimized for acoustic guitar sounds. In addition to the knobs on the panel, there are also sub-parameters inside the main unit. For example, in the "EQ" section, you can change the Q of the MID, adjust the tone of the booster function, select the type of acoustic resonance, adjust the tone, etc. to create your own particular sound. As a countermeasure against howling, which is essential for live performances, it is equipped with a reduction function that specializes in the low frequency range where howling is likely to occur. There is little change in sound quality, and howling can be effectively suppressed just by turning the knob. In addition, it is equipped with two notch filters that can automatically detect howling points, making it possible to powerfully remove howling. There's also a standby looper function that allows you to record and play loops of up to 80 seconds to make your performances more colorful, such as when you're playing or singing, so you can perform in real time at any time. By connecting a foot switch or expression pedal to the external control terminal and assigning various functions, you can customize the unit's operation to your liking. Main unit operation is based on a simple manual mode that allows you to change the tone in conjunction with the knob position, but also includes a memory mode that allows you to recall and play up to 10 pre-saved memories. It also has a built-in BOSS quality tuner that also functions as a MUTE function, allowing for comfortable live settings by preventing sound leakage between songs and noise when changing guitars. The AD-10 is also useful for recording. If you connect it to your PC via USB, it can also function as an audio interface, allowing you to create songs with high-quality acoustic guitar sounds. Powered by 6 AA alkaline batteries, it can run for up to 6 hours. Also compatible with AC adapter (PSA-100). Live solution tool for high-end acoustic guitarists The AD-10 is an acoustic preamp aimed at high-end guitarists who are particular about the sound of their electric-acoustic guitars during live performances. The AD-10 reproduces the details of an acoustic guitar with high-quality sound, and you can create the sound with simple operation using the knobs on the panel. The input circuit has a thorough low-noise design that can transmit high-quality signals from the onboard preamp and piezo PU, and there are two input systems, compatible with both piezo pickup and magnetic pickup. It also features acoustic resonance that reproduces the original "ringing" of an acoustic guitar, a compressor using MDP processing, and a 4-band EQ optimized for acoustics, making it possible to create high-quality sounds. We also provide sub-parameters that allow you to precisely create your tone, as well as special effects such as ambience. In addition, as a countermeasure against feedback, it is equipped with two notches and a reduction function with little change in tone. The two stereo outputs (XLR, standard) can be configured in a variety of ways to suit the situation at the live performance. It's Noh.
