Hyakuichi Ceramic Bezel Watch Mechanical Automatic Hand Winding Automatic 200m Water Resistant Reverse Rotation Prevention Ceramic Bezel Crown Watch

[Specifications] Mechanical [Japanese movement] Hand-wound function available Water resistant to 20 ATM Non-date Reverse rotation prevention ceramic bezel Screw-in crown [Material] Case: Stainless steel Bezel: Ceramic Belt: Stainless steel [Size] Case approx. H50 x W43 x D13mm Bezel diameter: Approx. 41mm Belt maximum arm circumference: Max approx. 20cm Lug width: 22mm [Included] HYAKUICHI exclusive box, 1 year store warranty, manual https://info-as.wixsite.com/hyakuichi This is a HYAKUICHI mechanical diver's model equipped with a ceramic bezel. The glossy bezel does not have to worry about fading. You can also enjoy the contrast between the deeply engraved numbers and the deep, shining black. The sunray dial has a simple and classical design, and the specifications make you feel the quality of the materials. Of course, we have adopted a see-through back so that you can fully enjoy the pleasure of being a mechanical watch. Functional markings are etched on the side of the case as a proof of reliability. In addition, the second hand, minute hand, and hour hand all have a hairline finish, which is an unprecedented specification, giving them a beautiful shine without glare. The brand logo is engraved on the crown, making it an exquisite piece with thorough attention to quality. The mechanical movement of the hands has a romance that cannot be found in the 1-second movement. When fully charged, it will run for about 41 hours (if you wear it, the pendulum movement will further extend the drive time). HYAKUICHI Diver's Watch Men's Watch 20 ATM Water Resistant Ceramic Bezel SUBMARINE ■Specifications Mechanical [Japanese Movement] Manual winding function available (with hack function) 20 ATM Water Resistant Calendar Reverse rotation prevention ceramic Bezel Screw-in crown Luminous paint (bright light) Non-date Applied index Trifold buckle ■Size Case: approx. H50 x W43 x D13mm Bezel diameter: approx. 41mm Face diameter: approx. 29mm Belt arm circumference: maximum approx. 20cm Belt (lug) width: 22mm ■Included items Main unit Instruction manual/warranty Storage box *This product has a non-date specification, but uses a movement with a date. Therefore, this product has two stages of raising the crown. When manually winding the reserve watch, please release the screw-down crown and do not pull the crown up. When the crown is pulled up one notch, the date below the dial moves, so there is no visible change. Also, you cannot wind it up in that state. The time can be adjusted by pulling the crown up two clicks. Regarding the reserve, if you are winding the watch by hand, we recommend turning it slowly to avoid putting stress on the mainspring, and once you have confirmed the movement of the hands, we recommend winding the watch automatically using the rotation of the rotor (clockwise).