Product Description
Whether you are looking for Cooling, Humidifying, Dust Suppression, or Outdoor Control System have the solution that satisfies your need.
One set misting system including:
6m:
3M water supply hose with Standard water tap adapter
3M assembled misting line with 6 nozzle seats
6 brass misting nozzles
20 Saddle clamps
20 cable ties
9m
3M water supply hose with Standard water tap adapter
6M assembled misting line with 11 nozzle seats
11 brass misting nozzles
30 Saddle clamps
30 cable ties
12m
3M water supply hose with Standard water tap adapter
9M assembled misting line with 16 nozzle seats
16 brass misting nozzles
40 Saddle clamps
40 cable ties
15m
3M water supply hose with Standard water tap adapter
12M assembled misting line with 21 nozzle seats
21 brass misting nozzles
50 Saddle clamps
50 cable ties
18m
3M water supply hose with Standard water tap adapter
15M assembled misting line with 26 nozzle seats
26 brass misting nozzles
60 Saddle clamps
60 cable ties
Installation Steps:
1. It is recommended to installed the misting system at a height of 2.5m-3m.
2. Connect the adapter to the water tap.
3. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.
4. Screw the misting nozzles to the Tee fittings, except the last one on the end plug.
5. Turn on the water tap to wash the system for 2 minutes to insure that the system is fully purged.
6. Turn the water off and install the last nozzle into the fitting with the end plug.
7. Fix the misting line by the cable ties saddle clamps provided.
8. Turn on the tap slightly until jets are working, enjoy the cooling misting system .
9. Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time
Vrátenie peňazí za nedoručenie
