Kabi White Mold and Mildew Removal Mold Remover Tatami Slatted and Spray, [For Wood, Mats, Floors, Mattresses, Curtains] (300ml)

While regular mold removers require rinsing and cannot be used indoors, Mold White Soft Removal evaporates to a harmless level once dry, making it easy to remove mold indoors. This professional-grade mold remover is suitable for commercial (professional) use and can be used on black, blue, red, green, and white mold. The danger level and chlorine odor during application are less than those of commercially available mold removers. ＜Actual mold removal method＞ Spray evenly onto the mold on the wood. There is no need to wet or wipe beforehand. Spray the chemical directly to prevent mold spores from scattering and causing mold to grow in other areas. If you spray it soaking wet, the chlorine smell will be difficult to remove, so just moistening it is sufficient for the effect. After spraying, leave it for 30 minutes. If mold still remains, spray that area again and leave it for 30 minutes. Repeat this process 2-4 times and the mold will gradually come off, even with 30-year-old mold. Once the mold is gone, wipe it off with water and let it dry. Drying time varies depending on the environment and the amount used, but it takes roughly the same amount of time as water to dry. During this time, do not go near the area you worked on, and if possible, move to another room. Using a fan will help shorten the drying time. Once the chlorine smell has disappeared and the area is dry and smooth, it is harmless to humans and animals. Use the same method to remove mold from rush tatami mats and white lace curtains. *Do not use on colored or patterned items as there is a risk of discoloration. Even with wood or tatami mats, please do a patch test by soaking the product in an inconspicuous area for at least 30 minutes to ensure there is no discoloration. Working multiple times in one day or spraying a large amount in one go can also cause discoloration, so keep checking the item for discoloration as you work, and if it turns slightly white, allow it to dry for a few days before resuming work. Product Name: Mold removal cleaner for wood, tatami mats, and fabrics. Contact: B-One Corporation, Ltd. Inquiries: 045-482-5592. Uses: Removing mold stains from wood, tatami mat rush, and white lace curtains. Cannot be used on: Metal (causes rust), colored and patterned fabrics, paper, and leather products. Directions for Use: Approx. 15 sprays per square meter. Please perform a patch test on an inconspicuous area first. (1) Turn the nozzle tip to the ▲ mark and set it to "ON." Do not point it at your face. (2) Spray directly from the mold stain, approximately 15 cm away. Do not spray above eye level. When using on high surfaces such as walls and ceilings, apply with a nylon brush. (3) After 30 minutes, rinse with water or wipe thoroughly with water. Allow to dry in areas that cannot be wiped with water. However, if more than 15 sprays per square meter are used, rinse or wipe with water. (4) After use, turn the nozzle tip to align the ▲ mark with "OFF" and store it upright in a cool, dark place. Always wash your hands after use, then wash your face and eyes. *For severe mold stains, leaving it for several minutes is effective. Precautions for use: ●Do not get the liquid in your eyes. Be careful. ● Always use alone. Mixing with acidic products, vinegar, alcohol, ammonia, etc. can produce harmful gases, which is dangerous. ● Do not use for any purpose other than intended. ● Foreign-made tiles or modular bathtubs may discolor, so be sure to test in an inconspicuous area before use. ● Leaving the product in the bathtub may cause discoloration, so rinse immediately with water. ● Be careful not to get it on clothing or rugs, as it will cause discoloration. ● Do not transfer to another container. ● To avoid damage, do not drop the product. ● Do not grip the container tightly when opening the cap. The contents may splash out. Caution: ● Using (mixing) with acidic products can produce harmful chlorine gas, which is dangerous. ● Always use in well-ventilated areas. ● If the liquid gets into your eyes, rinse immediately with water. ● Keep out of reach of children. ● Do not use if you are not feeling well or have heart or respiratory problems. ● Always use in well-ventilated areas. If there is a ventilation fan, use it in combination with the product, and for best results, open two or more windows or doors. ● Wear rubber gloves, a mask, and safety glasses/goggles. ●Do not use large amounts at once or for long periods of time. ●Never use while bathing. ●Do not use to remove mold that has penetrated deep into packing or caulking. To remove it, use a mold removal gel. First aid: ●If it gets into your eyes: Immediately rinse with running water for at least 15 minutes. Be sure to consult an ophthalmologist immediately. If left untreated, it may lead to blindness. ●If it is swallowed: Do not induce vomiting, rinse the mouth immediately, give the person 1-2 glasses of water or milk and consult a doctor. ●If it gets on your skin: Immediately rinse with running water until the slimy feeling disappears. If any abnormalities occur, consult a dermatologist. ●If your eyes sting, you cough, or you feel unwell while using the product, stop using it, leave the area, and wash your eyes and gargle. *In either case, bring the product with you when you visit a doctor. Ingredients: Hypochlorite, sodium hydroxide (1.0%), non-ionic surfactant (polyoxyethylene alkyl ether), stabilizer. Liquid: alkaline