----------------------------------------------------------------------
【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
----------------------------------------------------------------------
A full-featured and highly practical 3-in-1 dual-channel digital oscilloscope designed for the maintenance and development industries.
The device has three main functions: oscilloscope, multimeter, and signal generator.
The oscilloscope adopts FPGA + MCU + ADC hardware architecture and boasts a sampling rate of 50MS/s, an analog bandwidth of 10MHz, and a built-in high-voltage protection module that can support measuring peak voltages up to ±400V.
The function signal generator can output 7 kinds of function signals with a maximum output of 2MHz. The output frequency, amplitude and duty cycle can be adjusted to meet different needs.
It has a built-in 3000mAh rechargeable lithium battery that provides up to 6 hours of standby time.
DDS Function Signal Generator with Adjustable Parameters
Save and display screenshots of waveforms for analysis
This is a fully-featured, highly practical 3-in-1 dual-channel digital oscilloscope designed for the maintenance and development industries. This device combines three key functions: oscilloscope, multimeter, and signal generator. The oscilloscope employs an FPGA + MCU + ADC hardware architecture, boasting a 50 MS/s sampling rate, 10 MHz analog bandwidth, and a built-in high-voltage protection module capable of supporting peak voltage measurements up to ±400 V. The multimeter features 4-digit, 10,000-point true RMS values and supports AC/DC voltage and current measurements, as well as capacitance, resistance, diode, and on/off measurement functions. The function signal generator can output seven types of function signals with a maximum output of 2 MHz. The output frequency, amplitude, and duty cycle can be adjusted to meet various needs. It features a built-in 3000 mAh rechargeable lithium battery, allowing for up to 6 hours of long standby time. It is a DDS function signal generator with adjustable parameters. It can save and display waveform screenshots for analysis. Basic Specifications:
■Oscilloscope: - Channels: Dual Channel - Sample Rate: 50MS/s - Analog Bandwidth: 10MHz (Dual Channel Independent 10MHz) - Storage Depth: 32KB - Impedance: 1MΩ - Time Base Range: 50ns-10s - Vertical Sensitivity: 20mV/div-10V/div (X1) - Maximum Measurement Voltage: ±400V - Trigger Mode: AUTO/Normal/Single - Trigger Type: Rising Edge, Falling Edge - Display Mode: YT/Scroll - Coupling Method: AC/DC - Save Waveform Screenshots: Yes - Export Waveform Images: Yes ■Multimeter: - DC Voltage: 9.999V~999.9V - AC Voltage: 9.999V~750.0V - DC Current: 9999uA~9.999A - AC Current: 9999uA~9.999A Resistance: 999.9Ω~99.99MΩ Capacitance: 9.999nF - 99.99mF Temperature: (-55~1300℃)/(-67~2372℃) Diode Test: Yes
Continuity test: Yes - Live line detection: Yes ■Function signal generator: - Channel: Single channel - Frequency: 1Hz-2MHz - Amplitude: 0.1-3.3V ■Standard package contents: - 2C23T digital oscilloscope *1 - P6100 probe *1 - Alligator clip probe *1 - Multimeter probe *1 - Charging cable *1 - User manual *1
