Package Included: Laptop Bottom Rubber Feet (2 pieces) Dull Color
Compatible Model: HP Pavilion X360 2-in-1 14-EK
Laptop Foot Pad Installation Guide
1. Preparation
1. Select the Appropriate Foot Pad
*Please confirm your laptop model and purchase the appropriate foot pad.
2. Prepare Tools
*Fine-tipped tweezers or a thin-bladed knife (for removing the old foot pad).
*Alcohol swabs or a cleaning cloth (for cleaning the adhesive surface).
*New foot pad.
2. Removing the Old Foot Pad
1. Carefully Peel Off the Old Foot Pad
*Slowly peel off the old foot pad from the edge with tweezers or a knife, being careful not to scratch the computer.
2. Note: If there is any adhesive tape or fixing parts remaining under the foot pad, remove them all. This will affect the installation of the new foot pad.
3. Clean the Adhesive Surface
*Wipe the bottom of the computer with an alcohol swab to remove any remaining adhesive or dust and ensure a secure adhesion for the new foot pad.
3. Installing the New Footpads
1. Alignment
* Align the new footpads in their original positions (using the remaining old footpads and the indentations on the laptop's body as a reference).
2. Secure
* Peel off the protective film from the back of the new footpads and gently press them down for 10-15 seconds to ensure a firm adhesion.
* Key check: Make sure each footpad is fully attached and that no edges are loose or floating.
4. Checking After Installation
1. Place the laptop on a flat surface and ensure it is stable (adjust the position of the footpads if they are wobbly).
2. Make sure the footpads are at the same height and the laptop is not tilted.
[Notes]
1. Model Matching
Make sure to purchase footpads that are fully compatible with your laptop model. Incompatible footpads may result in poor installation or adhesion.
2. Removal Tips
Forcibly removing the footpads with a hard tool such as a screwdriver may damage the laptop or the internal screw holes.
3. Installation Details
If you encounter resistance, check for any remaining old adhesive tape or foreign objects.
After installing the new foot pads, avoid moving your laptop frequently for 24 hours and allow the adhesive to fully harden.
4. Environmental Conditions
Make sure your hands and the laptop are dry before installation. Adhesion will be weakened in humid environments.
Following the above steps will ensure a secure installation of the new foot pads, extending the life of your laptop and improving your user experience.
If you have any questions, please feel free to contact our customer service. Thank you for your cooperation.
Laptop Bottom Rubber Feet for HP Pavilion X360 2-in-1 14-EK (2 pieces) Dull Color
Pre-purchase Note: Before purchasing, please confirm the model you require and ensure the product you are purchasing is compatible. (See below for detailed information.) After confirming your model, please also verify that the part you have is the same as the product image. The product you receive will be the same as the image, so please check carefully.
*"Foot Pad Installation Procedures and Precautions" 1. Completely remove the old foot pads to expose the mounting holes. 2. First, attach them from both ends, firmly fitting the pads into the mounting holes on the PC body. Next, align the center hole and press them in to seal. Installation is complete.
Pre- and Post-Sales Support: If you have any questions before purchasing, please contact customer support at any time. If you have any questions or dissatisfaction after receiving the product, please contact customer support.
Thank you for your continued patronage. Customer satisfaction is our top priority, and we will continue to provide even better service in the future. We appreciate your continued patronage.
Vrátenie peňazí za nedoručenie
