Feature:
1. The diaphragm pump adopts a four chamber brand new design, and its operation is very quiet.
2. The diaphragm pump is equipped with a switch to adjust the pressure, and the flow is sufficient.
3. When the actual use flow is less than the water output of the pump, the bypass switch pressure relief cycle will start, which greatly reduces the trouble of pressure switch damage and effectively protects the pressure switch from damage.
4. Excellent performance, suction lift can attain 3 meters, head of delivery can attain 38 meters.
5. The pump has simple structure, few wearing parts, easy to install and maintain.
Specification:
Item Type: Diaphragm Pump
Material:engineering Plastics
Volume of Solid Impurities: less than 0.1
Particles: less than 0.2mm
Environment Temperature: less than 50 celsius
Medium Temperature: 0 65 celsius
Ph Range: 5.0 10
Flux: 18.0L min
Head of Delivery: Approx.38 Meters 41.6yd
Suction Range: Approx.3.0 Meters 3.3yd
Gallon: 5.0GPM
Use Scenarios: Car Wash, Filling Machine, Garden Agricultural Spray, Agricultural Spray, Water Heater, Home Water Pressurization, Yacht, Shower Pressurization, Green Spray Fog1. When the Water Pump is Working, Ensure That the Water Pump Drains Smoothly to Avoid Holding the Pump and Causing Damage to the Pressure Switch.
2. If You Hear the Abnormal Sound of the Switch Ticking During Operation, Please Turn off the Pump Immediately and Increase the Pressure Appropriately.
3. The Motor Has a Slight Waterproof Function. Do Not Worry Too Much About Splashing a Little Water (you Can Wipe It Dry), but It is Strictly Forbidden to Soak the Pump Motor in Water. if the Pump is Placed in the Open Air, It Should Be Covered to Prevent Water from Splashing into the Motor. Cause Power Outage, Leakage or Motor Damage.
4. The Water Inlet Must Be Installed with a Filter Device, Can Not Inhale the Liquid with Impurities, Otherwise Easy to Plug the Pump, Will Cause the Pressure to Reduce the Flow of Small, or Even Pumping Water and Other Problems.
5. It is Strictly Forbidden to Use This Machine Without Connecting the Filter. the Density of the Filter Should Be Above 80 Mesh (impurities Will Cause Damage to the Pump).
6. When Using 12v 24v Dc Motors, Users Are Not Allowed to Directly Use 110v 220v Power Supplies. if Directly Plugged into the 110v 220v Power Supply, the Motor Will Burn out Immediately. the Pump Can Transport Liquids Such As Water, Weak Acids, Alkalis, and Salts, but Not. Liquids with Particles, Gasoline and Other Combustible Liquids.
7. The Water Pump Works Intermittently and Must Not Work for 24 Hours.
8. Please Disconnect the Motor Pump from the Power Supply when It is Not Used for a Long Time or when It is Temporarily Suspended.
9. The Water Pump Has a Pressure Switch Adjustment Function. the Pressure Can Be Adjusted Appropriately According to Its Actual Needs, but It Cannot Be Adjusted Too Small or Too Large. if the Switch is Too Small, It is Easy to Start and Stop Frequently and Cause Burnout. if the Switch is Too Large, It May Not Work Proper
10. Please Confirm the Power Supply Before Use, the Power Supply Parameters Must Be Consistent with the Input Parameters of the Motor Pump
11. In Order to Avoid Water Leakage of the Rotor when the Product Fails, the Correct Installation Method is to Face Down or Lay the Pump Head Flat..
Package List:
1 x Diaphragm Pump2 x Quick Fittings1 x Filter1 x User Manual
Note:
Vrátenie peňazí za nedoručenie
