[Size and Selection] This is a thin silicone tube with an inner diameter of 0.5mm, an outer diameter of 1mm, a thickness of 0.25mm, and a length of 2m. The displayed dimensions indicate the inner and outer diameters. Measure the diameter of the object to be inserted, such as thin wires, fishing lines, thin shafts, or small parts, and confirm ease of insertion and retention before selecting.
[Transparent and Easy-to-Handle Material] Made from transparent silicone material, you can work while checking the internal flow and insertion position. It can be cut to the required length and used as a protective tube covering parts of thin wires or small components. Trim the cut edge, avoid pulling too hard, and insert the object gradually.
[Heat and Weather Resistance] The specified temperature range for use is -60 to 200 degrees Celsius. When using in high or low-temperature environments, also check the material, load, usage time, and surrounding environment of the connected components. Compatibility with chemicals, solvents, acidic liquids, and alkaline liquids varies by conditions, so prior confirmation in the actual usage environment is necessary.
[For Model Piping and Thin Wire Protection] With an inner diameter of 0.5mm and an outer diameter of 1mm, it can be used for thin piping in models, protection of enamel or metal wires, float setups, and positioning of small parts. Cut to the required length and confirm that the dimensions match the object. If used around pumps, check the usage conditions such as pressure and flow rate in advance.
[Purchase Quantity and Length] This product contains one 2m silicone tube per item. If two items are purchased, there will be two 2m tubes, not a continuous 4m tube. Confirm the required length and quantity before selecting. When using for fixing or connecting, check the diameter of the object and the usage conditions.
Vrátenie peňazí za nedoručenie
